No support can be guaranteed by ODIS Service for PassThru devices that are not validated.ODIS Engineering 9.0.4 - Offboard Diagnostic InfoThe Offboard Diagnostic Information System Engineering software is the program that provides you with an interface that complies with SAE J2534 (diagnostic interface). Information as to whether the device used is already validated can be requested from the respective manufacturer of the PassThru device. Administrator rights are required for the software installation.The PassThru devices (VCI) with SAE-J2534 conform interface used must be validated for communication with the ODIS Service. To start up, the respective box should be connected to the diagnostic tester via the USB port and the appropriate driver software installed before starting the ODIS Service. The following VAS diagnostic interfaces are supported:VAS 6154 (WLAN capable) (Windows 7 + Windows 10)VAS 5054A (wireless via Bluetooth) (Windows 7)VAS 5055 (cable via USB connection) (Windows 7)In addition to the VAS diagnostic interfaces mentioned, other SAE J2534-compliant diagnostic interfaces are supported by the Offboard Diagnostic Information System. works with the adapter VAS5054a only on Windows 7.On Windows 10, use VAS 6154 or PassThru compatible adapterThis information is only available in the diagnostic software during an active diagnostic session. ODIS Engineering 9.0.4 +ODIS Service 5.0.4 +Postsetup 2018+DataFlash 2018+Installation+LicenseODIS Service 5.0.4 PostSetup 75.0.50ODIS Service - an offboard Diagnostic Information System Service for concern VAG (Audi, VW, Seat, Skoda, Lamborgini, Bentley) can be installed on the VAS 5051B, VAS 5052A, VAS 6150, VAS 6150A, VAS 6150B, VAS 6160 or a standard stationary or portable computers and used with VAS5054a, VAS 5055, CarDAQ-Plus, iFlash, PassThru SAE J2534.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |